Latest activity

What's new New posts New profile posts Latest activity
  • T
    Tussock replied to the thread The junkyard approach.
    Airflow meter test is now done and it looks good, as peak output voltage was 3.6V at 6500rpm, wide open throttle I think max signal...
  • K
    Koolaid reacted to maticulus's post in the thread RX8 Renesis Rotary eSC with Like Like.
    I've often looked at this trend and imagined being able to achieve a max boost level that was too high from launch, to just over...
  • K
    Koolaid reacted to AlexLTDLX's post in the thread P2 Supercharger Thread with Like Like.
    I sent you a pm; a lot of these questions will be answered in my upcoming vids... sry to be brief; but very busy atm.
  • K
    Koolaid reacted to brettus8's post in the thread RX8 Renesis Rotary eSC with Like Like.
    Hamilton NZ which is at 40m above sea level.
  • B
    brettus8 reacted to Koolaid's post in the thread Andy from AZ with Like Like.
    Hello all, I came across a video by Alex and love the idea. Most of my life I have worked in the auto aftermarket 12v installation...
  • B
    brettus8 replied to the thread RX8 Renesis Rotary eSC.
    Hamilton NZ which is at 40m above sea level.
  • K
    Koolaid replied to the thread RX8 Renesis Rotary eSC.
    I just read through this whole thread and really like what I am seeing/reading. Thank you for sharing and thanks to all that replied...
  • AlexLTDLX
    AlexLTDLX replied to the thread P2 Supercharger Thread.
    I sent you a pm; a lot of these questions will be answered in my upcoming vids... sry to be brief; but very busy atm.
  • K
    Koolaid replied to the thread P2 Supercharger Thread.
    For sure, I have been following all of the recent updated videos. I have been only looking at the Vortech S trim compressor map. I will...
  • M
    maticulus replied to the thread P2 Supercharger Thread.
    It's important to note his discovery of a negative mismatch in the P2 performance next to the accepted compressor map that has been in...
  • K
    Koolaid replied to the thread P2 Supercharger Thread.
    Hey guys I am planning to go the route of the P2 Supercharger and the Castle 2535 680kv motor with direct drive to eliminate any pulleys...
  • K
    Koolaid posted the thread Andy from AZ in Introduce Yourself!.
    Hello all, I came across a video by Alex and love the idea. Most of my life I have worked in the auto aftermarket 12v installation...
  • r.brown.bayliss
    r.brown.bayliss replied to the thread Sodium battery breakthrough - maybe.
    I think this breakthrough (if real) is about the cost per kwh, 90% cheaper than previous gen technology
  • N
    nÖqµd replied to the thread Sodium battery breakthrough - maybe.
    …or LTO, which are a little less energy dense compared to LiFePo4 cells, but supposedly can discharge at a 5-10C rate. Also marketed as...
  • r.brown.bayliss
    r.brown.bayliss reacted to maticulus's post in the thread RX8 Renesis Rotary eSC with Like Like.
    I've often looked at this trend and imagined being able to achieve a max boost level that was too high from launch, to just over...
Show older items
Top