brettus8's latest activity
-
BUnfortunately, the ECU on the early S2000 cannot be tuned. I'd have to replace it to tune it. I turned the boost up to 4psi today and...
-
Bbrettus8 replied to the thread S2000 Rotrex + Electric Motor.IMO you need to get tuning software and tune it for boost. Trying to do it mickey mouse style might be ok for 1-2psi but it will...
-
BI had a week of fighting the ecu. It was pulling a ton of timing killing all power. I got that sorted - I had clamped the MAP sensor a...
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Yeah ... motor sits at around 48C under there doing nothing.
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Just came back from 'Mad Mike's Summerbash'. Had three one hour sessions on track . These sessions are not full blown race pace...
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Had zero issues with mine .... highest power I've seen out of battery is 18.5Kw so far at 25000ish rpm - I think there is more left in it.
-
Bbrettus8 replied to the thread Meth injection tuning..Wow ...great video and explanation! For me I really have to stick with some water though, due to safety concerns, plus it really does...
-
Bbrettus8 replied to the thread Meth injection tuning..just thinking aloud here ... this is not from experience. Would it be fair to say that while water does a better job of reducing knock...
-
Bbrettus8 replied to the thread Scary battery purchase time.I'm using my max4 at 54.5V and it still works fine - for the last 6 months or so anyway. Any higher and the my charger trips out the ESC...
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Might be worth me trying it with dual motors seeing as It's working so far. I figure the P2 is capable of 3-4 x more than what I've...
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Thanks for the reply. Interestingly, I'm not seeing my belt get hot at all at around 18KW peak and 27000rpm. Could be a few factors in...
-
BI doubt it will be a problem at all considering the traditional loads the motor was designed for in a near 50lb rc car shock loading it...
-
Bbrettus8 replied to the thread VESC(ted) ESC trial.Might pay to get those gears closer in to the motor end bearing if at all possible ... shaft flex/bearing wear might become an issue...
-
Bbrettus8 replied to the thread RX8 Renesis Rotary eSC.Update : Having to bring the eSC in quite late due to surge as mentioned above was getting to me. Had been thinking about variable speed...
